Serving the Lancaster area  ·  (661) 466-4946  ·  Open Mon-Sun 7am-7pm
📞 (661) 466-4946 Free Quote

Metal Roofing in Palmdale, CA (93552) · Local Professionals

Lancaster Metal Roofing · Fast response in Palmdale and the Lancaster area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+182Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Palmdale is high desert, not beach town, and your roof knows the difference. From the 1980s stucco subdivisions off Palmdale Boulevard to the newer builds spreading toward Avenue S, most homes here sit under relentless UV, triple-digit summers, and spring winds that sandblast shingles and lift panels.

We are Lancaster Metal Roofing, based just up the 14, and we install, repair, and replace metal roofs across Palmdale and ZIP 93552. Whether you are near the Antelope Valley Mall or out toward Pearblossom Highway, we know how standing seam and stone-coated steel handle this valley's heat and wind.

Metal Roofing in Palmdale (93552)

Palmdale lots are wide and flat, but that does not mean easy access. Older ranch homes around the BLVD and Sierra Highway often have low-pitched roofs with multiple layers of old shingles, and we have to check whether code allows a recover or requires a full tear-off. Newer two-story stucco homes in west Palmdale and the Rancho Vista area typically have concrete tile roofs that are heavy and aging, and switching to standing seam cuts weight while reflecting heat. Out east toward Sun Village and Littlerock, ranchettes, barns, and workshops need panels that can handle dust, sand, and the occasional fallen limb. Our team deals with flashing details at stucco walls, tight side-yard access, and the wind uplift that comes with open desert exposure every week.

We have been working roofs across the Antelope Valley for years, and Palmdale is a big part of that. We know which neighborhoods have HOA design review, which streets get the worst afternoon wind, and how to schedule around the summer heat so crews stay safe and your roof goes on right.

Our services in Palmdale

How a Job Works in Palmdale

Step 1: You call (661) 466-4946 or request a free estimate online. We schedule an on-site assessment, inspect your current roof, check attic ventilation and flashing, and talk through options like standing seam, stone-coated steel, or a retrofit over your existing shingles. You get a written scope and price before any work starts.

Step 2: Once you approve, we pull the roofing permit with the City of Palmdale (or LA County if you are unincorporated) and coordinate any HOA submittal if your neighborhood requires it. Crews arrive with materials staged to fit your driveway and side yard, and we protect landscaping and stucco walls as we tear off or install. In Palmdale heat, we start early and keep hydration and safety on schedule.

Step 3: We clean the site daily, magnet-sweep for nails, and do a final walkthrough with you. We show you the completed work, explain maintenance, and make sure you are satisfied before we pack up. Your property is left clean and your roof is ready for the next monsoon or wind event.

Pricing in Palmdale depends on roof size, pitch, access, and condition. As a ballpark, corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) around $7, installation around $8, replacement around $9, and standing seam around $10. Stone-coated steel and metal shingle run around $9, while copper and specialty metals start around $20. Repairs like leak fixes start around $450, screw replacement and re-fastening around $750, and flashing or skylight repair around $600. Snow guards and ice protection start around $1,200, and gutters for metal roofs start around $9 per linear foot. Free inspections and estimates are available for storm damage and commercial or agricultural roofs. Call (661) 466-4946 for a free estimate tailored to your Palmdale property.

My 1980s stucco home in west Palmdale has original concrete tile. Can you switch it to standing seam without structural changes?
In most cases yes, but we check your roof framing and sheathing first. Concrete tile is heavy, and standing seam is much lighter, so the switch often reduces load. We inspect the attic and framing during the free estimate and tell you if any reinforcement is needed before we quote.
A windstorm just peeled back panels on my roof near Palmdale Boulevard. How fast can you respond?
We prioritize active leaks and wind damage in Palmdale and the surrounding area. Call (661) 466-4946 and we will schedule an inspection as soon as possible, often same or next day depending on storm volume. We can tarp or secure the roof to prevent further damage while we prepare a repair plan.
What does a typical metal roof replacement cost for a 1,800 square foot ranch home in 93552?
For a home that size, a basic corrugated or ribbed panel roof might start around $10,000 to $12,000, while standing seam could run $18,000 or more depending on pitch, tear-off, and flashing details. These are ballpark figures. We give you an exact written estimate after inspecting your roof.
Do I need a permit from the City of Palmdale to replace my roof, and how long does it take?
Yes, a roofing permit is typically required for a full replacement or re-roof in Palmdale. Requirements and fees vary, and if you are in an unincorporated area, LA County handles it. We pull the permit for you and schedule inspections. Timing varies, but we plan it into your project schedule so there are no surprises.
My HOA requires approval for roof color. Can you help with that process in Palmdale?
We can provide product specs, color samples, and installation details for your HOA submittal. Many Palmdale HOAs have design review, and we are familiar with the common requirements. We will coordinate with you and your HOA so the color and profile are approved before we order materials.
Are you fully insured for roofing work at my Palmdale property?
Yes. We carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Palmdale's desert climate?
Inspect fasteners and seals annually, especially after windy spring seasons. Clear debris from valleys and gutters, and check flashing around chimneys and skylights. The intense UV can degrade sealants over time, so a periodic check and touch-up will extend the life of your roof. We offer free inspections to help you stay ahead of problems.
Why choose us?

Trusted professionals in Lancaster

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lancaster

All your work handled by qualified professionals in Lancaster

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

182+ Verified Client Reviews in Lancaster

⭐⭐⭐⭐⭐ 4.9/5 · 182 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lancaster · Response within 24h · No commitment · ☎ (661) 466-4946

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lancaster ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm