Serving the Lancaster area  ·  (661) 466-4946  ·  Open Mon-Sun 7am-7pm
📞 (661) 466-4946 Free Quote

Metal Roofing in Tehachapi, CA (93561) · Local Professionals

Lancaster Metal Roofing · Fast response in Tehachapi and the Lancaster area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+182Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Tehachapi is a mountain town where the wind never really stops and the sun hits hard at 4,000 feet. The mix of older ranch homes, newer subdivisions off Highway 58, and working ag properties around Bear Valley Springs means roofs here take a beating from UV, dust, and winter storms that roll over the Tehachapi Mountains.

We're Lancaster Metal Roofing, and we serve Tehachapi (93561) from our base in Lancaster because we know this climate. From the horse properties off Cummings Valley Road to the stucco homes near Tehachapi High School, we've seen what happens when shingles fail and metal holds up. If you're tired of replacing asphalt every 15 years, give us a call.

Metal Roofing in Tehachapi (93561)

Tehachapi sits at about 4,000 feet in the Tehachapi Mountains, which means you get four real seasons and wind that can peel a poorly fastened panel right off. The housing stock runs from 1950s ranch-style homes near downtown to 1980s and 90s subdivisions with concrete tile roofs, plus a lot of ranchettes, barns, and workshops out toward Golden Hills and Stallion Springs. Those outbuildings need metal roofing that can handle snow loads, ice damming at the eaves, and the occasional fallen limb from the pines and oaks that grow here. The ground is rocky and sloped in many parts, so access and staging matter. We plan for that before we show up.

Our team has worked on everything from standing seam on a custom home off Woodford-Tehachapi Road to corrugated panels on a hay barn in Cummings Valley. We know how to flash around chimneys and skylights in a way that holds up to the freeze-thaw cycles you get up here. And we understand that a metal roof in Tehachapi isn't just about looks. It's about keeping the snow and rain out and reflecting that high-altitude sun so your attic doesn't cook in July.

Our services in Tehachapi

How a Job Works in Tehachapi

Step 1: You call us at (661) 466-4946 or fill out our contact form. We schedule a free on-site assessment at your Tehachapi property, whether it's a house in town or a barn out on a gravel road. We look at the roof, the decking, the flashing, and the access, and we give you a written estimate with options. No pressure, no sales pitch.

Step 2: Once you approve, we pull the permits through the City of Tehachapi or Kern County, depending on where you are. We coordinate with your schedule and any HOA requirements if you're in a subdivision. On the day of the job, our crew shows up on time, protects your landscaping, and gets to work. If it's a steep pitch or a tight lot, we bring the right equipment and take our time to do it safely.

Step 3: When we're done, we walk the job with you, clean up every nail and scrap, and make sure you're happy with the finished roof. We don't leave until you've signed off and we've hauled away all the debris. We leave your property clean.

Pricing in Tehachapi depends on the size and complexity of your roof, the material you choose, and how accessible the property is. For a typical house, metal roof installation starts around $8 per square foot, standing seam runs about $10 per square foot, and a full replacement starts at $9 per square foot. If you're retrofitting over existing shingles, that starts at $7 per square foot. Smaller jobs like a repair or leak fix start at $450, and screw replacement or re-fastening starts at $750. We also handle gutters, snow guards, and flashing repairs. Every property is different, so the best way to get a real number is to call us at (661) 466-4946 for a free estimate. We'll give you a clear, written price with no surprises.

Do I need a metal roof in Tehachapi because of the wind and snow?
Yes, metal roofing is a smart choice here. Tehachapi gets strong winds that can lift shingles and snow that can cause ice damming at the eaves. Metal panels, especially standing seam, are fastened with screws that hold tight and shed snow better than asphalt. We've seen metal roofs last decades up here while shingles fail in half that time.
Can you respond to storm damage or a leak emergency in Tehachapi?
We do storm and wind damage repair and offer free inspections. If a storm has lifted panels or you have an active leak, call us at (661) 466-4946. We'll get out to your Tehachapi property as soon as we can, assess the damage, and make temporary repairs if needed before we schedule the permanent fix.
What does a metal roof cost for a typical Tehachapi home?
Most homeowners in Tehachapi spend between $8 and $12 per square foot for installation, depending on the material. A 1,500 square foot roof might run $12,000 to $18,000 for standing seam, while a corrugated panel roof could be closer to $8,000 to $12,000. Repairs start at $450. The exact price depends on your roof's pitch, access, and condition, so call us for a free estimate.
Do I need a permit for a metal roof in Tehachapi?
Yes, a full replacement or re-roof typically requires a permit from the City of Tehachapi or Kern County, depending on your location. We handle the permitting process for you and make sure the work meets local code. If you're in a historic district or an HOA, there may be design review requirements as well, and we can help you navigate those.
My neighbor's tree hangs over my property line in Tehachapi. Can I trim it before my roof install?
In California, you generally have the right to trim branches that overhang your property, but you can't cut so much that you harm the tree. It's best to talk to your neighbor first. If you're in an HOA, check the rules. We can work around overhanging branches during installation, but trimming them back can make the job safer and protect your new roof.
Are you insured for work on my Tehachapi property?
Yes, we are fully insured with general liability and workers' compensation coverage. That protects you and your property in case of an accident.
How often should I inspect my metal roof in Tehachapi?
We recommend a professional inspection every two to three years, especially after a big windstorm or a heavy snow year. In Tehachapi, the freeze-thaw cycles can loosen fasteners over time, and dust and debris can clog gutters. A quick check can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Lancaster

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Lancaster

All your work handled by qualified professionals in Lancaster

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

182+ Verified Client Reviews in Lancaster

⭐⭐⭐⭐⭐ 4.9/5 · 182 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Lancaster · Response within 24h · No commitment · ☎ (661) 466-4946

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Lancaster ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm